SCHEDULE SERVICE           CALL 503-231-0444
MBI Motors
  • Home
  • Meet Our Team
    • About
  • Services
    • Mercedes Benz
      • Mercedes Benz A Service
      • Mercedes Benz B Service
    • Mercedes Metris
    • BMW
    • Smart Car
    • Mini Cooper
    • Alignment
  • Specials
  • Testimonials
    • Gallery
  • Parts
  • Financing
  • Articles
  • Contact
  • Click to open the search input field Click to open the search input field Search
  • Menu Menu
  • Link to Facebook Link to Facebook Link to Facebook
  • Link to Yelp Link to Yelp Link to Yelp
  • Link to Youtube Link to Youtube Link to Youtube

Noticing Fluid Under Your Mercedes ML350?

Keeping a decade old Mercedes ML350 running well takes attention to drivetrain health, especially as wear patterns develop with age. With years of experience serving Portland, our technicians have worked on hundreds of Mercedes vehicles and recognize patterns worth looking out for, like checking transfer case input seals. We saw fluid seepage in an all-wheel-drive ML350 with over 100,000 miles during a Service A visit. This story tells you what we did.mercedes ml350 2013 under the hood

  • Issue: Transfer case fluid seepage discovered during routine maintenance
  • Root Cause: Worn input shaft seal and radial sealing ring
  • What Happened: Gradual fluid loss that could affect gear and bearing lubrication if left unaddressed (no issues reported by owner)
  • What We Did: Replaced seals with genuine Mercedes components and completed full Service A maintenance
  • Where: MBI Motors, Portland (schedule your car with us 503-231-0444)
  • Result: Seepage resolved, fluid levels restored, drivetrain confirmed operating smoothly

Is Your Mercedes Giving You a Warning Sign?

Transfer case fluid seepage can develop slowly in all-wheel-drive Mercedes vehicles, especially those with a decade or more of use. Our technicians check critical seal points during every Service A inspection, paying close attention to the transfer case input seal, where sustained rotation and heat can gradually reduce the seal’s ability to hold gear oil.

Catching seal wear early can help head off bigger problems. Small amounts of fluid seepage found during scheduled maintenance often give us time to plan a repair before serious fluid loss happens. If seepage continues unaddressed, it can eventually lead to low fluid levels that may affect lubrication of the precision-machined gears and bearings inside the transfer case. As you can imagine, these components need proper oil levels to hold up under the changing loads of acceleration, cornering, and all-wheel-drive use. Worst case scenario if left unaddressed is internal bearing damage that ends up requiring transfer case replacement.

Regular Service A maintenance gives you a good chance to catch problems like this early. Our technicians check underneath the vehicle on our lifts, looking for fresh oil residue around the transfer case housing and input shaft area. Places we can issues before the driver would notice problems themselves.

For Portland drivers who count on their ML350’s all-weather capability through our wet winters, keeping the transfer case in good shape supports reliable power distribution between the front and rear axles. We’ll keep your 4MATIC system performing whether it’s an I-5 commutes or a Mount Hood weekend trip.

What We Found on this ML350

Diagnosing transfer case seal wear starts with visual inspection during routine maintenance. Our technicians examined the undercarriage of this 2013 ML350, with 128,000 miles on it, focusing on the wear points where seal breakdown often shows up in all-wheel-drive Mercedes vehicles as they age.

With the vehicle raised and properly lit, our technicians found fresh fluid residue around the input shaft area. It’s a pattern that can point to seal compromise. Combined with the vehicle’s age and service history, we focused on the input shaft seal as the likely source.

We also checked surrounding drivetrain components like driveshaft U-joints, CV boots, and differential seals for anything that might have contributed to early wear, such as vibration or misalignment. Nothing pointed to an underlying mechanical issue; the wear looked consistent with normal age-related breakdown, so we moved forward with seal replacement as the fix.

How We Fixed the ML350

MBI’s technicians followed Mercedes-Benz factory service procedures to complete both the seal repair and full Service A maintenance:

  1. Changed the engine oil and filter using Mercedes-Benz approved synthetic motor oil and a genuine Mercedes filter, refilling to the manufacturer-specified capacity
  2. Inspected and topped off brake fluid, power steering fluid, coolant, and washer fluid to Mercedes-Benz specifications, documenting the condition of each
  3. Raised the vehicle and removed the transfer case assembly, disconnecting the front and rear driveshafts, the 4MATIC control module wiring, and the mounting bolts per factory procedure
  4. Removed the worn input shaft seal and radial shaft sealing ring, carefully cleaning all sealing surfaces to protect the housing
  5. Installed genuine Mercedes replacement seals using the Mercedes-Benz specified tooling to get proper seating and alignment
  6. Reinstalled the transfer case, reconnected the driveshafts and 4MATIC wiring, and refilled with Mercedes-Benz specified gear oil
  7. Checked and corrected tire pressures to Mercedes-Benz specifications using a calibrated gauge
  8. Road tested the vehicle through acceleration, highway speeds, cornering, and braking, watching for leaks, noise, or vibration, then performed a final underbody inspection to confirm fluid levels held steady and all fasteners were properly torqued

The road test showed no leaks from the new seals and confirmed smooth power delivery with proper 4MATIC engagement.

How Can I Prevent Transfer Case Issues in My ML350?

Keeping up with fluid levels, using manufacturer-specified gear oil, and staying on top of scheduled inspections all help protect the transfer case and its seals. A couple of things worth watching for between visits:

  • Fresh fluid spots under the vehicle, especially near the transfer case
  • Any change in how the drivetrain feels during acceleration or cornering

If you notice any of these, getting it checked sooner rather than later can help keep a minor issue from turning into a bigger repair.

How often should my ML350 be inspected for transfer case seal wear?

Regular inspection during scheduled Service A and Service B visits gives us the best chance to catch seal wear early, particularly on ML350 models with higher mileage. Our technicians check the usual wear points at every visit, looking for fluid residue around the housing and input shaft.

What maintenance steps can help extend the life of my transfer case seals?

Keeping proper fluid levels and using manufacturer-specified gear oil supports seal health. Addressing any fluid leaks promptly also helps avoid low fluid levels that could affect lubrication of the internal gears and bearings.

Trust MBI Motors With Your Mercedes Maintenance in Portland

You deserve a shop that knows your Mercedes ML350 inside and out. At MBI Motors, our Mercedes-trained technicians specialize in comprehensive maintenance and drivetrain repair, backed by years of European automotive expertise and a reputation built on quality work and open communication with our clients. Call us at 503-231-0444 to schedule your ML350’s next service.

Categories

  • BMW
  • MBI Motors News
  • Mercedes
  • Mercedes Metris Van
  • Mercedes Smart Car

Office

Address
1309 SE Hawthorne Blvd
Portland, OR 97214

Phone
503-231-0444

Hours:
M-F: 7:30AM–5:00PM

CONTACT US

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

This contact form is deactivated because you refused to accept Google reCaptcha service which is necessary to validate any messages sent by the form.
google maps listing

MBI Motors

Address: 1309 SE Hawthorne Blvd Portland, OR 97214

Schedule a Repair

Hours

Mon-Fri: 7:30AM–5:00PM

CALL US: 503-231-0444

Copyright | MBI Motors
  • Link to Facebook Link to Facebook Link to Facebook
  • Link to Yelp Link to Yelp Link to Yelp
  • Link to Youtube Link to Youtube Link to Youtube
Link to: Why Your Smart ForTwo Won’t Charge: What We Found Link to: Why Your Smart ForTwo Won’t Charge: What We Found Why Your Smart ForTwo Won’t Charge: What We Foundsmart-fourtwo-charging-error-facebook Link to: Diesel Cold Start Problems in a Mercedes ML320 Might Be the Glow Plug Link to: Diesel Cold Start Problems in a Mercedes ML320 Might Be the Glow Plug Glow plug control module mercedesDiesel Cold Start Problems in a Mercedes ML320 Might Be the Glow Plug
Scroll to top Scroll to top Scroll to top